[VX800] White screen after installing drivers

Bug #665463 reported by Alberto Jovito
6
This bug affects 1 person
Affects Status Importance Assigned to Milestone
openchrome
New
Unknown
xserver-xorg-video-openchrome (Ubuntu)
Incomplete
Undecided
Unassigned

Bug Description

Binary package hint: xserver-xorg-video-openchrome

the team is a siragon ml-6200 by then install ubuntu tube that modify the xorg to show a resoluciòn 1280 x 800.

To install the driver vx800 screen displays blank is due by the xorg is modified after the installation file to connect an external monitor this if displayed image I have tried to modify the xorg for that image internal monitor but I could not just with this xorg previous I have image

# xorg.conf (X.Org X Window System server configuration file)

#

# This file was generated by dexconf, the Debian X Configuration tool, using

# values from the debconf database.

#

# Edit this file with caution, and see the xorg.conf manual page.

# (Type "man xorg.conf" at the shell prompt.)

#

# This file is automatically updated on xserver-xorg package upgrades *only*

# if it has not been modified since the last upgrade of the xserver-xorg

# package.

#

# If you have edited this file but would like it to be automatically updated

# again, run the following command:

# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Monitor"

DisplaySize 390 246

Identifier "Monitor[0]"

ModelName "1280x800@60Hz"

Option "DPMS"

HorizSync 28-50

VertRefresh 43-73

EndSection

Section "Device"

Identifier "Configured Video Device"

Driver "openchrome"

VendorName "VIA Tech"

BoardName "via"

Option "ForcePanel"

Option "ActiveDevice" "LCD,CRT"

Option "PanelSize" "1280×800?

Option "SWcursor"

EndSection

Section "Screen"

Identifier "Default Screen"

Device "Configured Video Device"

Monitor "Monitor[0]"

DefaultDepth 24

SubSection "Display"

Depth 24

Modes "1280x800"

EndSubSection

EndSection

to change Driver "openchrome" line "via" reboot shows a screen black and only I can start small graphic mode

i speak spanish only this translate for bing

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: xserver-xorg-video-openchrome 1:0.2.904+svn827-1
ProcVersionSignature: Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5
Uname: Linux 2.6.32-24-generic i686
NonfreeKernelModules: 3dspusbbt 3dspusbbtpriv 3dspusbwlan 3dspusbwlanpriv 3dspusbbus
Architecture: i386
CheckboxSubmission: 0264197c628ed4d06ffb6c80842ef1ca
CheckboxSystem: e3f7e64142c9de9cf92c77313821923d
Date: Sat Oct 23 02:17:40 2010
DkmsStatus: Error: [Errno 2] No existe el archivo o directorio
InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429)
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=875c1eb7-38c0-4686-b21a-8d0c48bed249 ro quiet splash
ProcEnviron:
 LANG=es_VE.UTF-8
 SHELL=/bin/bash
SourcePackage: xserver-xorg-video-openchrome
dmi.bios.date: 11/16/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 080014
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: To be filled by O.E.M.
dmi.board.vendor: To be filled by O.E.M.
dmi.board.version: To be filled by O.E.M.
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 10
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080014:bd11/16/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnTobefilledbyO.E.M.:rnTobefilledbyO.E.M.:rvrTobefilledbyO.E.M.:cvnToBeFilledByO.E.M.:ct10:cvrToBeFilledByO.E.M.:
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
system:
 distro: Ubuntu
 codename: lucid
 architecture: i686
 kernel: 2.6.32-24-generic

Revision history for this message
Alberto Jovito (thedemon007) wrote :
Revision history for this message
Bartosz Kosiorek (gang65) wrote :

What is happen when you run Ubuntu without xorg.conf file?

You have made a typo in xorg.conf:
Change:
   Option "PanelSize" "1280×800?
to:
  Option "PanelSize" "1280×800"

Revision history for this message
Bartosz Kosiorek (gang65) wrote :

Attach your XorgLog.txt file when you run without xorg.conf

Revision history for this message
Bartosz Kosiorek (gang65) wrote :

The support for Siragon ML-6200 was added in latest openchrome revision.

Please build/install the latest openchrome driver and enable debug mode.
The detail build instruction for Ubuntu/Debian is available at:
https://help.ubuntu.com/community/OpenChrome

summary: - White screen after installing drivers vx800
+ [VX800] White screen after installing drivers
Changed in xserver-xorg-video-openchrome (Ubuntu):
status: New → Confirmed
Revision history for this message
Alberto Jovito (thedemon007) wrote :

al correr
 without xorg.conf la pantalla muestra unas rayas extrañas como de estatica de un televisor por que el monitor es de resolucion
1280x800 al conectar un monitor externo si da imgen normal

Revision history for this message
Alberto Jovito (thedemon007) wrote :
Revision history for this message
Alberto Jovito (thedemon007) wrote :
Revision history for this message
Alberto Jovito (thedemon007) wrote :

aff sorry this translation:

 run without xorg.conf screen displays a few strange of static on a television monitor is 1280 x 800 resolution to connect an external monitor if normal image stripes

Revision history for this message
Alberto Jovito (thedemon007) wrote :
Revision history for this message
Bartosz Kosiorek (gang65) wrote :

Please build/install the latest openchrome driver.

The detail build instruction for Ubuntu/Debian is available at:
https://help.ubuntu.com/community/OpenChrome

Revision history for this message
Bartosz Kosiorek (gang65) wrote :
Revision history for this message
Alberto Jovito (thedemon007) wrote :

the problem occurs after you install the latest version Unified GFX driver see 87th-55689 for Ubuntu 10.04 (29 Sep 10) I can do that image in the internal monitor (only white screen 9 but works normal with one external.)

as I can't image modify the xor of the current

Revision history for this message
Alberto Jovito (thedemon007) wrote :

I try to compile the drivers via-xserver-86th-50283_src.tgz doing make gives the following error

lberto@ml-6200:~/Descargas/via-xserver-86a-50283_src/XServer$ sudo make
[sudo] password for alberto:
make all-recursive
make[1]: se ingresa al directorio `/home/alberto/Descargas/via-xserver-86a-50283_src/XServer'
Making all in src
make[2]: se ingresa al directorio `/home/alberto/Descargas/via-xserver-86a-50283_src/XServer/src'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -DXFree86LOADER -I/usr/include/drm -I/usr/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_common.lo -MD -MP -MF .deps/via_common.Tpo -c -o via_common.lo via_common.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -DXFree86LOADER -I/usr/include/drm -I/usr/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_common.lo -MD -MP -MF .deps/via_common.Tpo -c via_common.c -fPIC -DPIC -o .libs/via_common.o
In file included from via_driver.h:42,
                 from via_common.h:29,
                 from via_common.c:32:
via_include.h:50:27: error: xf86Resources.h: No existe el archivo o directorio
make[2]: *** [via_common.lo] Error 1
make[2]: se sale del directorio `/home/alberto/Descargas/via-xserver-86a-50283_src/XServer/src'
make[1]: *** [all-recursive] Error 1
make[1]: se sale del directorio `/home/alberto/Descargas/via-xserver-86a-50283_src/XServer'
make: *** [all] Error 2

Revision history for this message
Alberto Jovito (thedemon007) wrote :

new driver via-xserver-87th-55727_src solves the problem file xf86Resources.h I read copilador instructions once installed mode debug I tried to load the driver via the line Driver "via" restart says that it is not found then the only svn applies openchrome drivers? with the driver openchrome I have no problems exempt that open wine freezes ubunutu both in U 1010 64 as U10.04 32 bit I however I fixed on something before installing the drivers in debug mode on both single ubuntu could use drivers opnechrome adding lines
        Option "ForcePanel"
        Option "PanelSize" "1280×800"
 if not added these lines presented the effect when you restart a wave-like lines as a tv with poor reception after installing the drivers in mode debug started with or without good añadidar lines add log this first one is when via driver does not load not so waterways installed nor the 2d nor the others just install svn

Revision history for this message
Alberto Jovito (thedemon007) wrote :

loading drivers vesa these loads without adding lines
        Option "ForcePanel"
        Option "PanelSize" "1280×800"

Revision history for this message
Alberto Jovito (thedemon007) wrote :

loading drivers via these load without adding single lines in debug mode otherwise presents the effect similar to the white screen
        Option "ForcePanel"
        Option "PanelSize" "1280×800"

Revision history for this message
Alberto Jovito (thedemon007) wrote :

loading drivers via these uploads by adding lines
        Option "ForcePanel"
        Option "PanelSize" "1280×800"

Revision history for this message
Bartosz Kosiorek (gang65) wrote :

Try to install this package and check if it helps:

http://www.uluga.ubuntuforums.org/showpost.php?p=9275836&postcount=431

Revision history for this message
Alberto Jovito (thedemon007) wrote :

Install drivers via_chrome9_u10.04_deb.zip restarting does not display image in the internal monitor sample is a black screen with some lines as static on the external monitor the image if it is displayed when you attempt to add the lines

Option "ForcePanel"
Option "PanelSize" "1280 × 800"

display image I think that if you could use the forcepanel problem is sulucionaria reboot I launches text-mode file log shows the following:

(**) (0) VIA: Active Device is LCD.

Backtrace:
0: /usr/bin/X (xorg_backtrace + 0x3b) [0x80eaadb]
1: /usr/bin/X (0x8048000 + 0x610fd) [0x80a90fd]
2: (vdso) (__kernel_rt_sigreturn + 0x0) [0x4e5410]
3: /lib/tls/i686/cmov/libc.so.6 (strtol+0x40) [0x516520]
4: /usr/lib/xorg/modules/drivers/via_drv.so (0x85b000 + 0x3174c) [0x88c74c]
5: /usr/lib/xorg/modules/drivers/via_drv.so (0x85b000 + 0x36e46) [0x891e46]
6: /usr/bin/X (InitOutput+0x5c8) [0x80b2088]
7: /usr/bin/X (0x8048000 + 0x1ebbb) [0x8066bbb]
8: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main + 0xe6) [0x4fcbd6]
9: /usr/bin/X (0x8048000+0x1e961) [0x8066961]
Segmentation fault at address (nil)

Caught signal 11 (Segmentation fault). Server aborting

Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

ddxSigGiveUp: Closing log

Revision history for this message
Alberto Jovito (thedemon007) wrote :

add the lines:

        Option "ForcePanel"
        Option "PanelSize" "1280×800"

Revision history for this message
Bartosz Kosiorek (gang65) wrote :

Please build/install the latest openchrome driver and enable debug mode.
The detail build instruction for Ubuntu/Debian is available at:
https://help.ubuntu.com/community/OpenChrome

Changed in xserver-xorg-video-openchrome (Ubuntu):
status: Confirmed → Incomplete
Revision history for this message
Alberto Jovito (thedemon007) wrote :

Well I have compiled new drivers I have installed in debug mode and to my surprise I could run without xorg.conf first! This debug mode attempts to do so without the debug mode to see. I mine the log file

Revision history for this message
Alberto Jovito (thedemon007) wrote :

I have been able to run without xorg.conf without debug mode also hope they incorporate this update in the next version of ubuntu that could run live cd without any problem that I had problems with the live cd by these drivers to run live cd I had to modify the xorg.

However the wine program continues freezing to open it and I can not activate Visual effects

Revision history for this message
Alberto Jovito (thedemon007) wrote :

I have not yet been able to run with drivers via shows the effect of static as mentioned I previously tried with this xorg I mine and gave a few errors in the log file. Is that the xorg file has some bugs also so other testing with another xorg

Revision history for this message
Alberto Jovito (thedemon007) wrote :

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eaadb]
1: /usr/bin/X (0x8048000+0x610fd) [0x80a90fd]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xd10410]
3: /usr/lib/xorg/modules/libfb.so (fbFinishScreenInit+0x11f) [0x92487f]
4: /usr/lib/xorg/modules/libfb.so (fbScreenInit+0x94) [0x924b74]
5: /usr/lib/xorg/modules/drivers/via_drv.so (0x287000+0x48f41) [0x2cff41]
6: /usr/bin/X (AddScreen+0x198) [0x806b988]
7: /usr/bin/X (InitOutput+0x820) [0x80b22e0]
8: /usr/bin/X (0x8048000+0x1ebbb) [0x8066bbb]
9: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x5d1bd6]
10: /usr/bin/X (0x8048000+0x1e961) [0x8066961]
Floating point exception at address 0x81c3f42

Caught signal 8 (Floating point exception). Server aborting

Please consult the The X.Org Foundation support
  at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eaadb]
1: /usr/bin/X (0x8048000+0x610fd) [0x80a90fd]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xd10410]
3: /usr/lib/xorg/modules/extensions/libdri.so (DRILock+0x37) [0xcafd47]
4: /usr/lib/xorg/modules/drivers/via_drv.so (0x287000+0x408fb) [0x2c78fb]
5: /usr/bin/X (SigAbortDDX+0x7d) [0x80b010d]
6: /usr/bin/X (0x8048000+0x5b148) [0x80a3148]
7: /usr/bin/X (0x8048000+0x5b561) [0x80a3561]
8: /usr/bin/X (0x8048000+0x61152) [0x80a9152]
9: (vdso) (__kernel_rt_sigreturn+0x0) [0xd10410]
10: /usr/lib/xorg/modules/libfb.so (fbFinishScreenInit+0x11f) [0x92487f]
11: /usr/lib/xorg/modules/libfb.so (fbScreenInit+0x94) [0x924b74]
12: /usr/lib/xorg/modules/drivers/via_drv.so (0x287000+0x48f41) [0x2cff41]
13: /usr/bin/X (AddScreen+0x198) [0x806b988]
14: /usr/bin/X (InitOutput+0x820) [0x80b22e0]
15: /usr/bin/X (0x8048000+0x1ebbb) [0x8066bbb]
16: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x5d1bd6]
17: /usr/bin/X (0x8048000+0x1e961) [0x8066961]
Segmentation fault at address 0x150

FatalSignal re-entered, aborting

Changed in openchrome:
importance: Undecided → Unknown
status: New → Unknown
Changed in openchrome:
status: Unknown → New
Revision history for this message
Alberto Jovito (thedemon007) wrote :

Hello wine problem already have solved you thanks to a patch I found here:

http://www.openchrome.org/trac/ticket/400#comment:6

To post a comment you must log in.