| 2011-11-29 07:09:17 |
Abhishek Paliwal |
bug |
|
|
added bug |
| 2011-11-29 07:09:17 |
Abhishek Paliwal |
attachment added |
|
Logcat and dmesg https://bugs.launchpad.net/bugs/897549/+attachment/2612086/+files/Staging-panda-build111-suspendScreenRefreshFails.txt |
|
| 2011-11-29 08:56:59 |
Abhishek Paliwal |
description |
Description:
==========
Screen update is failing when device goes into suspend mode.
Eg: Screen timeout set to 15 sec, open Settings menu, wait 15 seconds, display continues to show Settings menu even after 15 seconds, ideally display should show locked screen.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Bad user experience
Steps:
==========
1. Set screen timeout to 15 seconds
2. Open any application/menu
3. Wait 15-20 seconds.
4. Device gets locked
Issue: Display not getting updated, does not show Locked state but continues to show the last active screen.
If I move the USB mouse around - then display gets updated and shows Locked screen.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
Logs:
======
Bootup Logs / Logcat / dmesg attached. |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Logs:
======
Bootup Logs / Logcat / dmesg attached. |
|
| 2011-11-29 08:58:04 |
Abhishek Paliwal |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Logs:
======
Bootup Logs / Logcat / dmesg attached. |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them. |
|
| 2011-11-29 08:58:11 |
Abhishek Paliwal |
attachment removed |
Logcat and dmesg https://bugs.launchpad.net/linaro-android/+bug/897549/+attachment/2612086/+files/Staging-panda-build111-suspendScreenRefreshFails.txt |
|
|
| 2011-12-29 12:01:24 |
Abhishek Paliwal |
linaro-android: importance |
Low |
Medium |
|
| 2012-04-23 10:03:42 |
Abhishek Paliwal |
bug task added |
|
igloocommunity |
|
| 2012-04-25 04:08:16 |
Sunil Kamath |
igloocommunity: assignee |
|
supriya karanth (supriya-karanth) |
|
| 2012-04-25 04:09:09 |
Sunil Kamath |
igloocommunity: importance |
Undecided |
Medium |
|
| 2012-04-27 13:50:05 |
supriya karanth |
igloocommunity: status |
New |
Confirmed |
|
| 2012-04-30 06:49:26 |
supriya karanth |
igloocommunity: status |
Confirmed |
In Progress |
|
| 2012-05-31 07:07:41 |
Jayeeta Bandyopadhyay |
igloocommunity: milestone |
|
2012.06 |
|
| 2012-06-12 03:49:02 |
supriya karanth |
igloocommunity: status |
In Progress |
Fix Committed |
|
| 2012-06-18 14:47:15 |
Fathi Boudra |
linaro-android: status |
New |
Confirmed |
|
| 2012-06-18 14:47:18 |
Fathi Boudra |
linaro-android: milestone |
|
12.06 |
|
| 2012-06-25 21:18:10 |
Zach Pfeffer |
linaro-android: milestone |
12.06 |
|
|
| 2012-08-31 12:33:41 |
Jayeeta Bandyopadhyay |
igloocommunity: status |
Fix Committed |
Fix Released |
|
| 2012-10-18 07:13:30 |
Amit Khare |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them. |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96 |
|
| 2012-10-23 05:12:08 |
Amit Khare |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1 |
|
| 2012-11-08 05:05:29 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112 |
|
| 2012-11-14 04:27:11 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117 |
|
| 2012-11-20 14:12:56 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127 |
|
| 2012-12-12 03:38:33 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148 |
|
| 2012-12-18 14:39:27 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/ |
|
| 2013-01-08 03:59:36 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/ |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177 |
|
| 2013-01-21 11:16:28 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193 |
|
| 2013-02-06 16:53:06 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205 |
|
| 2013-02-14 05:13:30 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212 |
|
| 2013-02-21 06:06:23 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219 |
|
| 2013-03-27 10:21:22 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.03-release/ |
|
| 2013-04-24 05:18:45 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.03-release/ |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.03-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.04-release/ |
|
| 2013-05-23 11:59:34 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.03-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.04-release/ |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.03-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.04-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=305 |
|
| 2013-05-29 13:11:56 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.03-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.04-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=305 |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.03-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.04-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=305
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.05-release/ |
|
| 2013-06-26 06:52:14 |
Soumya Basak |
description |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.03-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.04-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=305
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.05-release/ |
Description:
==========
Connect USB cable to Board, UI shows USB connection notification but there is no option to use SD card for mass storage transfers over USB.
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Unable to test mass storage feature.
Steps:
==========
1. Boot up device
2. Connect USB cable between host machine and device
3. No notification about available USB mass storage feature under USB connection notifications.
Hardware:
==========
Panda Board Rev A3
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.12-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=77
https://android-build.linaro.org/builds/~linaro-android/staging-panda/#build=111
And in all other ICS releases as well.
Note: Logs attached are for another issue so ignore them.
Also observed with following builds.
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/staging-panda-11.12-release/#build=3
https://android-build.linaro.org/builds/~linaro-android/staging-imx53-11.12-release/#build=7
https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-igloo-stable-blob-12.04-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=23
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=36
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=44
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=54
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.09-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=96
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.10-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=112
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=117
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=127
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=148
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob-12.12-release/
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=177
https://android-build.linaro.org/builds/~linaro-android/snowball-jb-gcc47-igloo-stable-blob/#build=193
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=205
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=212
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=219
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.03-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.04-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb/#build=305
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.05-release/
https://android-build.linaro.org/builds/~linaro-android-member-ste/snowball-linaro-jb-13.06-release/#build=1 |
|
| 2013-06-26 07:05:50 |
appalanaidu bade |
bug |
|
|
added subscriber appalanaidu bade |
| 2014-05-05 06:30:58 |
Soumya Basak |
attachment added |
|
logcat.txt https://bugs.launchpad.net/linaro-android/+bug/897549/+attachment/4105326/+files/logcat.txt |
|
| 2014-08-26 03:01:08 |
Chase Qi |
bug watch added |
|
https://bugs.linaro.org/show_bug.cgi?id=444 |
|
