ubuntu@ubuntu-desktop:~$ dmesg [ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fdf7000 (usable) [ 0.000000] BIOS-e820: 000000000fdf7000 - 000000000fe16000 (ACPI data) [ 0.000000] BIOS-e820: 000000000fe16000 - 0000000010000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 253MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 65015) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 65015 [ 0.000000] HighMem 65015 -> 65015 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 65015 [ 0.000000] On node 0 totalpages: 65015 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 475 pages used for memmap [ 0.000000] Normal zone: 60444 pages, LIFO batch:15 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FD6D0 checksum 0 [ 0.000000] ACPI: RSDP 000FD6D0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 000FD6E4, 0030 (r1 DELL GX150 5 ASL 61) [ 0.000000] ACPI: FACP 000FD718, 0074 (r1 DELL GX150 5 ASL 61) [ 0.000000] ACPI: DSDT FFFE5022, 2474 (r1 DELL dt_ex 1000 MSFT 100000D) [ 0.000000] ACPI: FACS 0FE16000, 0040 [ 0.000000] ACPI: SSDT FFFE7496, 00A7 (r1 DELL st_ex 1000 MSFT 100000D) [ 0.000000] ACPI: BOOT 000FD7E8, 0028 (r1 DELL GX150 5 ASL 61) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000) [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64508 [ 0.000000] Kernel command line: root=UUID=73073c89-b7a6-4e62-83d0-c0b355164d1c ro quiet splash [ 0.000000] Found and enabled local APIC! [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 996.828 MHz processor. [ 15.154675] Console: colour VGA+ 80x25 [ 15.154687] console [tty0] enabled [ 15.155125] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 15.155563] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 15.178053] Memory: 245924k/260060k available (2157k kernel code, 13644k reserved, 998k data, 364k init, 0k highmem) [ 15.178072] virtual kernel memory layout: [ 15.178074] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 15.178077] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 15.178080] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) [ 15.178083] lowmem : 0xc0000000 - 0xcfdf7000 ( 253 MB) [ 15.178086] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 15.178089] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 15.178091] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 15.178099] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 15.178171] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 15.258181] Calibrating delay using timer specific routine.. 1995.30 BogoMIPS (lpj=3990615) [ 15.258239] Security Framework initialized [ 15.258257] SELinux: Disabled at boot. [ 15.258286] AppArmor: AppArmor initialized [ 15.258296] Failure registering capabilities with primary security module. [ 15.258313] Mount-cache hash table entries: 512 [ 15.258557] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.258582] CPU: L1 I cache: 16K, L1 D cache: 16K [ 15.258587] CPU: L2 cache: 256K [ 15.258594] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 [ 15.258617] Compat vDSO mapped to ffffe000. [ 15.258648] Checking 'hlt' instruction... OK. [ 15.274694] SMP alternatives: switching to UP code [ 15.277417] Freeing SMP alternatives: 11k freed [ 15.277706] Early unpacking initramfs... done [ 16.005156] ACPI: Core revision 20070126 [ 16.016876] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.039865] ACPI: setting ELCR to 0200 (from 0e00) [ 16.040377] CPU0: Intel Pentium III (Coppermine) stepping 0a [ 16.040391] SMP motherboard not detected. [ 16.146090] Brought up 1 CPUs [ 16.146145] CPU0 attaching sched-domain: [ 16.146151] domain 0: span 01 [ 16.146155] groups: 01 [ 16.146635] net_namespace: 64 bytes [ 16.146659] Booting paravirtualized kernel on bare hardware [ 16.147884] Time: 5:44:48 Date: 04/23/08 [ 16.147963] NET: Registered protocol family 16 [ 16.148454] EISA bus registered [ 16.148496] ACPI: bus type pci registered [ 16.174045] PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=1 [ 16.174051] PCI: Using configuration type 1 [ 16.174055] Setting up standard PCI resources [ 16.179274] ACPI: EC: Look up EC in DSDT [ 16.201724] ACPI: Interpreter enabled [ 16.201732] ACPI: (supports S0 S1 S3 S4 S5) [ 16.201765] ACPI: Using PIC for interrupt routing [ 16.228141] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.228443] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 16.228450] PCI quirk: region 0880-08bf claimed by ICH4 GPIO [ 16.228788] PCI: Transparent bridge - 0000:00:1e.0 [ 16.228821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.229816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 16.245486] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 16.245868] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 16.246276] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 16.246663] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 16.247036] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 16.247413] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 16.247787] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 16.248166] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 16.248512] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.248583] pnp: PnP ACPI init [ 16.248604] ACPI: bus type pnp registered [ 16.273594] pnp: PnP ACPI: found 13 devices [ 16.273601] ACPI: ACPI bus type pnp unregistered [ 16.273611] PnPBIOS: Disabled by ACPI PNP [ 16.274150] PCI: Using ACPI for IRQ routing [ 16.274158] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.274174] PCI: Cannot allocate resource region 8 of bridge 0000:00:1e.0 [ 16.285975] NET: Registered protocol family 8 [ 16.285981] NET: Registered protocol family 20 [ 16.286162] AppArmor: AppArmor Filesystem Enabled [ 16.289937] Time: tsc clocksource has been installed. [ 16.298027] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 16.298035] system 00:00: iomem range 0x100000-0xffffff could not be reserved [ 16.298041] system 00:00: iomem range 0x1000000-0xfdf6fff could not be reserved [ 16.298048] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 16.298055] system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved [ 16.298061] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved [ 16.298092] system 00:0c: ioport range 0x800-0x85f has been reserved [ 16.298098] system 00:0c: ioport range 0xc00-0xc7f has been reserved [ 16.298104] system 00:0c: ioport range 0x860-0x8ff could not be reserved [ 16.329013] PCI: Bridge: 0000:00:1e.0 [ 16.329024] IO window: e000-efff [ 16.329033] MEM window: disabled. [ 16.329038] PREFETCH window: disabled. [ 16.329058] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 16.329089] NET: Registered protocol family 2 [ 16.366136] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 16.366651] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 16.366843] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 16.367040] TCP: Hash tables configured (established 8192 bind 8192) [ 16.367046] TCP reno registered [ 16.378263] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 16.974296] it is [ 17.737718] Freeing initrd memory: 7282k freed [ 17.738249] Simple Boot Flag at 0x7d set to 0x1 [ 17.739218] audit: initializing netlink socket (disabled) [ 17.739256] audit(1208929489.456:1): initialized [ 17.744271] VFS: Disk quotas dquot_6.5.1 [ 17.744505] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 17.744890] io scheduler noop registered [ 17.744898] io scheduler anticipatory registered [ 17.744903] io scheduler deadline registered [ 17.744939] io scheduler cfq registered (default) [ 17.744973] Boot video device is 0000:00:02.0 [ 17.745633] isapnp: Scanning for PnP cards... [ 18.099564] isapnp: No Plug & Play device found [ 18.177042] Real Time Clock Driver v1.12ac [ 18.177241] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.177467] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.177761] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.178946] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.179490] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.181211] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.181703] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 18.181940] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 18.183860] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.183870] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.193481] mice: PS/2 mouse device common for all mice [ 18.193734] EISA: Probing bus 0 at eisa.0 [ 18.193783] EISA: Detected 0 cards. [ 18.193790] cpuidle: using governor ladder [ 18.193795] cpuidle: using governor menu [ 18.194160] NET: Registered protocol family 1 [ 18.194233] Using IPI No-Shortcut mode [ 18.194319] registered taskstats version 1 [ 18.194485] Magic number: 4:926:719 [ 18.194690] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 18.194695] EDD information not available. [ 18.195896] Freeing unused kernel memory: 364k freed [ 18.241389] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 19.742684] fuse init (API version 7.9) [ 21.038040] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 21.038050] PCI: setting IRQ 11 as level-triggered [ 21.038056] ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 21.038074] 3c59x: Donald Becker and others. [ 21.038085] 0000:01:0c.0: 3Com PCI 3c905C Tornado at d0838c00. [ 21.248741] SCSI subsystem initialized [ 21.430982] libata version 3.00 loaded. [ 21.461329] Floppy drive(s): fd0 is 1.44M [ 21.471172] ata_piix 0000:00:1f.1: version 2.12 [ 21.471315] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 21.482152] FDC 0 is a National Semiconductor PC87306 [ 21.483932] scsi0 : ata_piix [ 21.508443] scsi1 : ata_piix [ 21.508588] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 21.508595] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 21.672953] ata1.00: ATA-6: Maxtor 2B020H1, WAH21PB0, max UDMA/100 [ 21.672965] ata1.00: 40020624 sectors, multi 8: LBA [ 21.688881] ata1.00: configured for UDMA/100 [ 22.008587] ata2.00: ATAPI: CRD-8482B, 1.05, max UDMA/33 [ 22.008603] ata2.00: device is on DMA blacklist, disabling DMA [ 22.172375] ata2.00: configured for PIO4 [ 22.172679] scsi 0:0:0:0: Direct-Access ATA Maxtor 2B020H1 WAH2 PQ: 0 ANSI: 5 [ 22.173189] scsi 1:0:0:0: CD-ROM LG CD-ROM CRD-8482B 1.05 PQ: 0 ANSI: 5 [ 22.882947] Driver 'sd' needs updating - please use bus_type methods [ 22.883167] sd 0:0:0:0: [sda] 40020624 512-byte hardware sectors (20491 MB) [ 22.883199] sd 0:0:0:0: [sda] Write Protect is off [ 22.883206] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.883250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.883364] sd 0:0:0:0: [sda] 40020624 512-byte hardware sectors (20491 MB) [ 22.883389] sd 0:0:0:0: [sda] Write Protect is off [ 22.883395] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.883436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.883446] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 22.900747] sda1 sda2 [ 22.926332] sd 0:0:0:0: [sda] Attached SCSI disk [ 22.942385] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 22.942398] Uniform CD-ROM driver Revision: 3.20 [ 22.942525] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 22.943846] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.943947] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 23.316372] Attempting manual resume [ 23.316382] swsusp: Resume From Partition 8:2 [ 23.316386] PM: Checking swsusp image. [ 23.316847] PM: Resume from disk failed. [ 23.387897] kjournald starting. Commit interval 5 seconds [ 23.387935] EXT3-fs: mounted filesystem with ordered data mode. [ 35.047220] Linux agpgart interface v0.102 [ 35.160928] agpgart: Detected an Intel i815 Chipset. [ 35.196330] agpgart: AGP aperture is 64M @ 0xf8000000 [ 35.232264] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.283034] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.440125] intel_rng: FWH not detected [ 35.868170] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 35.939958] iTCO_vendor_support: vendor-support=0 [ 35.999997] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 36.000378] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0860) [ 36.000463] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 36.056022] i810_smbus 0000:00:02.0: i810/i815 i2c device found. [ 37.087951] input: Power Button (FF) as /devices/virtual/input/input3 [ 37.099572] ACPI: Power Button (FF) [PWRF] [ 37.099872] input: Power Button (CM) as /devices/virtual/input/input4 [ 37.115509] ACPI: Power Button (CM) [VBTN] [ 40.110352] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 40.503505] parport_pc 00:0b: reported by Plug and Play ACPI [ 40.503611] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 40.568982] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 40.603885] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 40.603897] PCI: setting IRQ 10 as level-triggered [ 40.603903] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 40.603938] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 41.222269] intel8x0_measure_ac97_clock: measured 55857 usecs [ 41.222279] intel8x0: clocking to 41142 [ 44.934147] lp0: using parport0 (interrupt-driven). [ 45.054228] Adding 971924k swap on /dev/sda2. Priority:-1 extents:1 across:971924k [ 45.681555] EXT3 FS on sda1, internal journal [ 47.691539] ip_tables: (C) 2000-2006 Netfilter Core Team [ 48.625775] No dock devices found. [ 51.070704] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 51.070719] apm: overridden by ACPI. [ 51.327309] ppdev: user-space parallel port driver [ 51.638621] audit(1208929523.903:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4597 profile="/usr/sbin/cupsd" namespace="default" [ 53.446640] eth0: setting full-duplex. [ 53.597075] Bluetooth: Core ver 2.11 [ 53.601675] NET: Registered protocol family 31 [ 53.601688] Bluetooth: HCI device and connection manager initialized [ 53.601698] Bluetooth: HCI socket layer initialized [ 53.770424] Bluetooth: L2CAP ver 2.9 [ 53.770437] Bluetooth: L2CAP socket layer initialized [ 53.806652] Bluetooth: RFCOMM socket layer initialized [ 53.807628] Bluetooth: RFCOMM TTY layer initialized [ 53.807637] Bluetooth: RFCOMM ver 1.8 [ 57.289313] NET: Registered protocol family 17 [ 57.409664] NET: Registered protocol family 10 [ 57.411115] lo: Disabled Privacy Extensions [ 59.235234] [drm] Initialized drm 1.1.0 20060810 [ 59.243335] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 59.243350] PCI: setting IRQ 9 as level-triggered [ 59.243356] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 59.243368] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 59.247553] [drm] Initialized i810 1.4.0 20030605 on minor 0 [ 59.249390] mtrr: base(0xf8000000) is not aligned on a size(0x12c000) boundary [ 59.260216] [drm] Using v1.4 init. [ 62.443997] [drm:drm_release] *ERROR* reclaim_buffers_locked() deadlock. Please rework this [ 62.444006] driver to use reclaim_buffers_idlelocked() instead. [ 62.444009] I will go on reclaiming the buffers anyway. [ 70.785598] eth0: no IPv6 routers present