Welcome to PulseAudio! Use "help" for usage information.
>>> 2 sink(s) available.
    index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9959
	volume: 0: 100% 1: 100%
	        0: 0,00 dB 1: 0,00 dB
	        balance 0,00
	base volume: 100%
	             0,00 dB
	volume steps: 65537
	muted: yes
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 4
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "STAC92xx Analog"
		alsa.id = "STAC92xx Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel"
		alsa.long_card_name = "HDA Intel at 0xf6ffc000 irq 47"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.name = "82801H (ICH8 Family) HD Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "SigmaTel STAC9228"
		alsa.components = "HDA:83847616,10280209,00100201"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output: Analoge Ausgabe (priority 9900, available: unknown)
			properties:
				
	active port: <analog-output>
  * index: 1
	name: <alsa_output.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00-Device.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9049
	volume: 0: 100% 1:  98%
	        0: 0,06 dB 1: -0,45 dB
	        balance -0,02
	base volume: 100%
	             0,06 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 2
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	card: 1 <alsa_card.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00-Device>
	module: 5
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "USB PnP Sound Device"
		alsa.long_card_name = "C-Media Electronics Inc. USB PnP Sound Device at usb-0000:00:1d.7-1.2, full spe"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:1d.7-usb-0:1.2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/sound/card1"
		udev.id = "usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00-Device"
		device.bus = "usb"
		device.vendor.id = "0ccd"
		device.vendor.name = "TerraTec Electronic GmbH"
		device.product.id = "0077"
		device.product.name = "Aureon Dual USB"
		device.serial = "C-Media_Electronics_Inc._USB_PnP_Sound_Device"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Aureon Dual USB Analog Stereo"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB0ccd:0077"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-output-speaker: Speakers (priority 10000, available: unknown)
			properties:
				
	active port: <analog-output-speaker>
>>>