Comment 21 for bug 1425699

I can confirm using after enabling the 14.10 images in MAAS, I now have
hwe-u as an option. I can also confirm that this does not in fact work
in the case of the Power 8 when commissioning:

Error: Couldn't load kernel image

Mike

On 05/13/2015 11:25 AM, Jeff Lane wrote:
> Summary:
> 1: Need to add 14.10 images from Releases Stream to even see hwe-u as an option
> 2: even though hwe-u is an option, it is unusable for commissioning currently (from Releaess).
> 3: We really need this usable in Releases, it's gating the Power 8 work.
>
>
> This morning I tried working on this a bit. Keep in mind, I did this on a non-Power system because I don't have easy access to it right now, and Mike is working on that.
>
> First, I had to install 14.10 installation media from the Releases
> stream. Once that was done, hwe-u became an option.
>
> Next, I clicked acquire node. Then Edit node.
>
> In the Edit screen, I set the ARCH to amd64/hwe-u, saved that and then
> clicked Commission to start the Commissioning process.
>
> The node powered up and failed to boot. The console says
>
> Booting under MAAS direction...
> nomodeset iscsi_target_name=iqn.2004-05.com.ubuntu:maas:ephemeral-ubuntu-amd64-hwe-u-trusty-no-such-image iscsi_target_ip=10.0.0.1 iscsi_target_port=3260 iscsi_initiator=these-grandmother ip=::::these-grandmother:BOOTIF ro root=/dev/disk/by-path/ip-10.0.0.1:3260-iscsi-iqn.2004-05.com.ubuntu:maas:ephemeral-ubuntu-amd64-hwe-u-trusty-no-such-image-lun-1 overlayroot=tmpfs cloud-config-url=http://10.0.0.1/MAAS/metadata/latest/by-id/node-d4c27b9-d7ee-11e4-8a03-eca86bfb9f66/?op=get_preseed log_host=10.0.0.1 log_port=514
> Could not find kernel image: ubuntu/amd64/hwe-u/trusty/no-such-image/boot-kernel
>
> boot:
>
> So since setting the arch to amd64/hwe-u failed to boot commissioning, I
> changed it to amd64/hwe-t and retried. hwe-t was successful in booting
> the server and commissioning it.
>
> Following commissioning, I attemped to just install the node using hwe-u
> after it was commissioned using hwe-t.
>
> I clicked acquire node. Then Edit Node.
>
> On the Edit Page, I set the arch to amd64/hwe-u, and left the OS and
> Release to Default (which is currently set to 14.04). I then tried to
> start the node for deployment.
>
> The node powered on and attempted to TFTP boot, but instead got a TFTP
> timeout error. It then automatically moved to the next NIC and again
> got the TFTP timeout, and at this point it just booted what was on the
> hard disk.
>
>
> Could not find kernel image: ubuntu/amd64/hwe-u/trusty/no-such-image/boot-kernel"
>
> Next, for completeness, I re-acquired the node, left arch at hwe-u and
> set the OS to Ubuntu and Release to 14.10 to see what would happen.
>
> With those settings, I was able to successfully deploy the system with
> Utopic.
>