(In reply to Darin Miller from comment #563)
> *Ubuntu version:
>
> 1) install kernel build tools:
> (https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel):
>
> * sudo apt install libncurses-dev gawk flex bison openssl libssl-dev dkms
> libelf-dev libudev-dev libpci-dev libiberty-dev autoconf git
>
> 2) clone the kernel from github and checkout to v5.17 branch (Rather large,
> multiple GB's):
>
> * git clone https://github.com/torvalds/linux.git
> * cd linux
> * git checkout v5.17-rc4
>
> 3) get the patch and install it:
>
> get the patch form this site and save to "linux" directory: (top right
> corner "series" button) and use the following "git am ..." line to apply the
> patch:
> https://patchwork.kernel.org/project/linux-acpi/patch/20220121172431.6876-4-
> <email address hidden>/
>
> * git am Support-Spi-in-i2c-multi-instantiate-driver.patch
>
> 4) load current kernel config and change configuration then run the
> following scripts/config commands:
>
> * make olddefconfig
> * ./scripts/config --enable CONFIG_SERIAL_MULTI_INSTANTIATE
> * ./scripts/config --enable CONFIG_SND_HDA_SCODEC_CS35L41_I2C
> * ./scripts/config --enable CONFIG_SND_HDA_SCODEC_CS35L41_SPI
> * ./scripts/config --disable CONFIG_DEBUG_INFO
> * ./scripts/config --set-str CONFIG_SYSTEM_TRUSTED_KEYS ""
> * ./scripts/config --set-str CONFIG_SYSTEM_REVOCATION_KEYS ""
>
> 6) build the kernel
>
> * make -j 16
>
> 7) install the kernel
>
> * sudo make module_install
> * sudo make install
Hi guys,
This is my first time compiling a kernel (Legion 7 16ACHg6/Ubuntu 20.04). I followed these steps (checked out the v5.17-rc8 branch on git) but at the end I am getting this error at the last step, just before running sudo make install:
arch/x86/Makefile:154: CONFIG_X86_X32 enabled but no binutils support
sh ./arch/x86/boot/install.sh 5.17.0-rc8+ \
arch/x86/boot/bzImage System.map "/boot"
*** Missing file: arch/x86/boot/bzImage
*** You need to run "make" before "make install".
(In reply to Darin Miller from comment #563) /wiki.ubuntu. com/Kernel/ BuildYourOwnKer nel): /github. com/torvalds/ linux.git /patchwork. kernel. org/project/ linux-acpi/ patch/202201211 72431.6876- 4- Spi-in- i2c-multi- instantiate- driver. patch SERIAL_ MULTI_INSTANTIA TE SND_HDA_ SCODEC_ CS35L41_ I2C SND_HDA_ SCODEC_ CS35L41_ SPI SYSTEM_ TRUSTED_ KEYS "" SYSTEM_ REVOCATION_ KEYS ""
> *Ubuntu version:
>
> 1) install kernel build tools:
> (https:/
>
> * sudo apt install libncurses-dev gawk flex bison openssl libssl-dev dkms
> libelf-dev libudev-dev libpci-dev libiberty-dev autoconf git
>
> 2) clone the kernel from github and checkout to v5.17 branch (Rather large,
> multiple GB's):
>
> * git clone https:/
> * cd linux
> * git checkout v5.17-rc4
>
> 3) get the patch and install it:
>
> get the patch form this site and save to "linux" directory: (top right
> corner "series" button) and use the following "git am ..." line to apply the
> patch:
> https:/
> <email address hidden>/
>
> * git am Support-
>
> 4) load current kernel config and change configuration then run the
> following scripts/config commands:
>
> * make olddefconfig
> * ./scripts/config --enable CONFIG_
> * ./scripts/config --enable CONFIG_
> * ./scripts/config --enable CONFIG_
> * ./scripts/config --disable CONFIG_DEBUG_INFO
> * ./scripts/config --set-str CONFIG_
> * ./scripts/config --set-str CONFIG_
>
> 6) build the kernel
>
> * make -j 16
>
> 7) install the kernel
>
> * sudo make module_install
> * sudo make install
Hi guys,
This is my first time compiling a kernel (Legion 7 16ACHg6/Ubuntu 20.04). I followed these steps (checked out the v5.17-rc8 branch on git) but at the end I am getting this error at the last step, just before running sudo make install:
arch/x86/ Makefile: 154: CONFIG_X86_X32 enabled but no binutils support x86/boot/ install. sh 5.17.0-rc8+ \ boot/bzImage System.map "/boot"
sh ./arch/
arch/x86/
*** Missing file: arch/x86/ boot/bzImage
*** You need to run "make" before "make install".
make: *** [arch/x86/ Makefile: 278: install] Error 1
Any help would be appreciated